2 in 1 Lamp

The lamp is equipped with a digital display and removable base, to perform pedicure services and allows correct cleaning of the appliance. Thanks to the sensitive mode function it is possible to lower the curing power to reduce the sense of heat caused by some gels.

FEATURES:

• Power: 48 watts
• Sensitive mode that lowers the power to 24 Watts
• Technology with infrared sensors
• Cures any type of reconstruction gel and semi-permanent gel polish with uv - led - led / uv technology
• 36 UV LEDs
• Rated input: 100-240V 50 / 60Hz 1 A
• Size: 237x208x114mm
• Digital display
• Touch keys
• Sensor for automatic on and off
• Smart Time memory function
• Programmable timer with automatic switch-off: 10 - 30 - 60 seconds and 99seconds for the sensitive mode function
• Very enveloping innovative design
• Optimization of polymerization times
• Homogeneous 5-finger polymerization
• Automatic ventilation holes
• Removable ABS base - magnetic
• Compact and light
• Energy saving
• Professional use

How to use:

1. Connect the power, connect the nail lamp.
2. Press the ON / OFF 1-2s button to open / close the machine. While counting the times, press the button again to enter Stand by mode to reset.
3. After starting the machine, the user can select the times of 10s / 30s / 60s are the countdown, 99s and the infrared sensors are clockwise.

Cautions: 

1. Please read the instruction carefully before using the lamp.
2. Please use correctly.
3. Do not allow any liquid into the machine otherwise, damage may occur. 
4. When timer button is out of use, please do not use. 
5. Please unplug the adaptor after you finish working. 
6. Do not use the lamp if the adaptor is not working properly. 
7. Please do not keep the lamp on continuously for more than 600s, otherwise the life of the lamp may be reduced.
8. When using, please wear protective glasses and radiation protection suits.
9. The lamp detects internal temperature automatically in longterm use.’’When the temperature is too high, the lamp turns to low-powerozeration, meanwhile the display shows ’’07p’’ status. Timing stops working and returns to normal power operation after lowering the temperature.